Images
Operating Instructions
Technical Data Sheets
Sales Leaflets
Posters
Livestock Health Articles
FAQs
- The traditional Dip Cup applies teat dip by immersing the teat in chemical and coating it with teat dip. Adding the DipMizer™ device adds a ‘sweeping’ step to the dipping routine in order to remove excess chemical from the cow’s teat as it is withdrawn from the Dip Cup – saving you money on unnecessary teat dip consumption.
- Removing too much teat dip can be counter-productive in that udder health could be compromised by leaving too little coating on the teat. The DipMizer™ is designed with special bristles that remove just enough chemical, but not too much, so that the teat is well protected. Always remove the DipMizer™ brush attachment at the end of milking and sanitise it in a cleaning solution to reduce the risk of contamination. Use a fresh clean brush attachment for each milking as recommended in an evaluation study undertaken by the Institute for Animal Health, Compton, United Kingdom.
- The DipMizer™ can be attached to all Ambic Dip Cups except the MultiFoamer™ and FoamDipper™.
DipMizer
| Part No | Description | Colour |
|---|---|---|
| ADM/101-B | DipMizer (single pack) | Blue |
| ADM/101-G | DipMizer (single pack) | Green |
| ADM/101-Y | DipMizer (single pack) | Yellow |
| ADM/101-0 | DipMizer (single pack) | Orange |
| ADM/103-B | DipMizer (pack of 3) | Blue |
| ADM/103-G | DipMizer (pack of 3) | Green |
| ADM/103-Y | DipMizer (pack of 3) | Yellow |
| ADM/103-0 | DipMizer (pack of 3) | Orange |
| ADM/030-5 | DipMizer brush only (pack of 5) |