Ambic has a range of automated dosing and dilution systems based on combining its extensive, well-proven range of Low-Volume and High-Volume Peristaltic Pumps with a new microprocessor control system. This system has been developed to control the operation of up to three peristaltic pumps of differing capacities to dispense and dose precise quantities of fluids for cleaning or sanitisation purposes. Typical applications include dispensing detergent, bleach, acid and/or alkaline for sanitisation purposes as well as for mixing and dilution.

The EasiDoser™ has an LCD display and keypad on the front of the unit for ease of set up and for programming pump run time and speed; the LCD display also shows relevant information when the unit is running and can be used to access performance data.

Features

• A combination of Low-Volume and High-Volume (62RPM– 188RPM) pumps with a range of tubes sizes (from 1.8mm to 6.3mm bore for Low-Volume Peristaltic Pumps & 9.6mm to 12.7mm bore for High-Volume Peristaltic Pumps) and tube polymers (Santoprene, Silicone, Viton) to suit different applications

• A combination of time and speed control functions enabling the amount of product dispensed to be determined both by reference to pump speed and run time for accurate dosing

• Pump Run Time adjustable from 1 to 5.00 minutes

• Pump Speed Control adjustable from 50% to 100%

• Pump Start Delay adjustable from 0 to 30 seconds

• A range of flow rates from a minimum of 75 ml/min to a maximum of 550 ml/min for Low-Volume Peristaltic Pumps and a minimum of 700 ml/min to a maximum of 3500 ml for High-Volume Peristaltic Pumps

• The unit has a ‘Pump Inhibit’ or ‘Lock-out’ safety feature which can prevent consecutive dispensing of chemicals where excessive dosing could be a hazard. This is adjustable from 0 to 30 minutes

• Data logging facility to record and display performance data, including cumulative run time and chemical consumption

• Pump calibration is made via the LCD display and keypad

• Password protected keypad for security

• Includes Low-Level alarm feature to warn when chemical levels are running low – appropriate Float Switch Assemblies can be purchased separately

• Available with different plugs to suit local markets