Ambic is Attending The 2018 British Mastitis Conference

Ambic have sponsored and is attending the 2018 British Mastitis Conference which is due to be held on 7 November 2018 at Pitch View Suite, Worcester Rugby Club, Sixways Stadium, Warriors Way, Worcester, Worcestershire, WR3 8ZE.  For more details visit the website.

If you would like to attend the conference please download the registration form by clicking here.

Ambic Introduces Upgrade to its Dip Cup Range

Ambic is updating its dip cup range with the addition of an innovative new Uptake Tube Adaptor which fits to the bottom of the uptake tube. It ensures that minimal teat dip chemical is left in the bottom of the dip cup bottle and prevents the uptake tube from ‘bottoming out’ when the dip cup is depressed to dispense teat dip chemical.

The Uptake Tube Adaptor is a particularly useful feature when higher added value, high viscosity barrier type teat dips or two part chemical formulations are used where it is important to minimise chemical wastage.

The new Uptake Tube Adaptor is compatible with both uptake tube sizes used in the Ambic range and will be included with all relevant Ambic models from September onwards (excluding ADC/100 StandardDipper™, ADC/130 FoamDipper™ which has foaming insert in the uptake tube and ADC/160 UniDipper™).

The new Uptake Tube Adaptor is available as a spare part in packs of 10 – part number ADC/001.

For further details contact sales@ambic.co.uk 

GDPR – General Data Protection Regulation

In line with the new data privacy law (General Data Protection Regulation or GDPR) which came into effect on 25th May 2018, we have reviewed our processes and controls to make sure we meet all the new requirements.

An updated website privacy policy has been posted on our website. Click here to view a copy.

Contact us here if you have any queries.

Ambic Sponsors NMC Regional Meeting in Milan

Ambic is sponsoring a short course at the NMC regional meeting which will take place from 11th -13th June 2018 at the Universitá degli Studi di Milano ‘La Statale’ University in Milan, Italy.

Richard Hiley will also be doing a presentation at the short course entitled ‘Welfare: Economics, Economics and Related Issues’.

Further details available at www.nmcmilano2018.com

 

Ambic Sponsors the 2018 British Mastitis Conference

Ambic have sponsored the 2018 British Mastitis Conference which is due to be held on 7 November 2018 at Pitch View Suite, Worcester Rugby Club, Sixways Stadium, Warriors Way, Worcester, Worcestershire, WR3 8ZE. If you would like to attend the conference please download the registration form by clicking on the link below.

Click here to download a copy of the Registration Form.

Addition of Ribs to the PortaSpray Nozzle

The moulding used to produce the standard PortaSpray nozzle (models RA4, RA40, RA2 and RA20 has been modified by the addition of ribs to the main body of the moulding, as shown in the illustration below. The ribs improve the moulding process as well as making the nozzles easier to screw into place on the spray trigger.

 

Please do not hesitate to contact sales@ambic.co.uk  if you have any questions.

 

Ambic launches new, improved AIAlert™ Extra Heat Detectors

Ambic is coming to market with a new, improved self-adhesive heat detector with improved sticking power and improved visibility, based on new patented ‘Channel and Chamber’ technology. The unique design of AiAlert™ Extra allows both side panels of the detector to ‘colour up’ after the central pressure sensitive bubble section has been activated by the pressure exerted on the cow by bulling behaviour. The detector has a built-in time delay mechanism which means it requires approximately 3 seconds of mounting activity before it is activated.

In Heat? Yes, but how far?

Subsequent mounts force the dye through channels into the chambered side panels. This gives the farmer increased visibility and an even stronger indication that multiple mounts have taken place.

If the dye has not migrated to the side panels it may be that the cow has only recently come into heat and insemination might be best left to the next milking, however, if the side panels are fully coloured the cow has most likely been bulling for some period of time and insemination may need to take place sooner.

Key features:

  • New, Improved self-adhesive design for superior adhesive strength
  • Simple yet effective application – minimal preparation and no messy glue
  • No pre-heating of patch required in cold conditions
  • Progressive indication of mounting heat activity
  • No experience required to interpret reading
  • Moulds easily over the cow’s backbone
  • Large surface area for better adhesion and improved visibility
  • Time-delay module focuses on true mounting heat to minimise false positives
  • One person application
  • Available in packs of 10 and 40

Contact sales@ambic.co.uk for further details.

 

 

Ambic Introduces New MultiFoamer Plus™ To Its Foaming Dip Cup Range

In response to customer demand for an improved foaming dip cup with the ability to adjust the foam quality to suit the characteristics of the particular foaming chemical being used, Ambic has developed a new premium version of its MultiFoamerfoaming dip cup which has the following key features:

  • Two woven meshes for primary foam generation
  • New, third stainless steel mesh welded into the body of the dip cup to optimise the foam structure in the final foam formation phase
  • Set of three different screw-in mixer valves to vary the ratio of air to chemical in order to be able to make the foam either wetter or drier, thus varying the amount of chemical applied

Like the original MultiFoamer™, the new MultiFoamer Plus™ is easily dismantled for ease of cleaning between uses and has a protected air intake to minimise particulate contamination.

Customised versions of the new MultiFoamer Plus™ are available to suit individual foaming teat dip chemicals. Consult Ambic for further details.

Contact sales@ambic.co.uk for further details.

EasiFoamer update released to the market

Ambic has released an update to the EasiFoamer which includes a number of product improvements and new features designed to improve the overall functionality of the system and to facilitate installation.

  • Firmware revisions include amendments to the settings parameters for Sleep Mode and Run Time
  • The bore of the peristaltic pump tubes has been reduced to reduce the number of pump start/stops during operation to reduce the overall load on the pressure switch
  • A Non-Return Valve with uptake filter has been added to the system to ensure the pump(s) stay primed at all times
  • In-line filters have been added to protect each of the liquid non-return valves in the system from contamination as an additional feature
  • A ‘Quick Start’ Guide will be included with all future systems to highlight common installation errors and to provide additional assistance with the installation process
  • Op Notes have been updated to reflect the above changes

Take a look at the EasiFoamer Quick Start Guide here  EasiFoamer Quick Start Guide

Contact sales@ambic.co.uk for further details

Ambic is attending the 2017 British Mastitis Conference

Ambic will be attending the 2017 British Mastitis Conference on 15 November 2017 at Pitch View Suite, Worcester Rugby Club, Sixways Stadium, Warriors Way, Worcester, Worcestershire, WR3 8ZE. If you too would like to attend the conference please download the registration form by clicking on the link below.

Click here to download a copy of the Registration Form.