Ambic is coming to market with a new, improved self-adhesive heat detector with improved sticking power and improved visibility, based on new patented ‘Channel and Chamber’ technology. The unique design of AiAlert™ ^Extra allows both side panels of the detector to ‘colour up’ after the central pressure sensitive bubble section has been activated by the pressure exerted on the cow by bulling behaviour. The detector has a built-in time delay mechanism which means it requires approximately 3 seconds of mounting activity before it is activated.

In Heat? Yes, but how far?

Subsequent mounts force the dye through channels into the chambered side panels. This gives the farmer increased visibility and an even stronger indication that multiple mounts have taken place.

If the dye has not migrated to the side panels it may be that the cow has only recently come into heat and insemination might be best left to the next milking, however, if the side panels are fully coloured the cow has most likely been bulling for some period of time and insemination may need to take place sooner.

Key features:

• New, Improved self-adhesive design for superior adhesive strength
• Simple yet effective application – minimal preparation and no messy glue
• No pre-heating of patch required in cold conditions
• Progressive indication of mounting heat activity
• No experience required to interpret reading
• Moulds easily over the cow’s backbone
• Large surface area for better adhesion and improved visibility
• Time-delay module focuses on true mounting heat to minimise false positives
• One person application
• Available in packs of 10 and 40

Contact sales@ambic.co.uk for further details.

 

 

Ambic has released an update to the EasiFoamer which includes a number of product improvements and new features designed to improve the overall functionality of the system and to facilitate installation.

• Firmware revisions include amendments to the settings parameters for Sleep Mode and Run Time
• The bore of the peristaltic pump tubes has been reduced to reduce the number of pump start/stops during operation to reduce the overall load on the pressure switch
• A Non-Return Valve with uptake filter has been added to the system to ensure the pump(s) stay primed at all times
• In-line filters have been added to protect each of the liquid non-return valves in the system from contamination as an additional feature
• A ‘Quick Start’ Guide will be included with all future systems to highlight common installation errors and to provide additional assistance with the installation process
• Op Notes have been updated to reflect the above changes

Take a look at the EasiFoamer Quick Start Guide here  EasiFoamer Quick Start Guide

Contact sales@ambic.co.uk for further details

Ambic has added a range of medium capacity peristaltic pumps to its pump range to complement its established range of low capacity and high capacity pumps to fill a gap in the range in response to customer demand.

• The low capacity pump range has a performance range between 75 ml/min and 550 ml/min
• The high capacity volume pump range has a performance range between 700ml/min and 4L/min
• The new medium capacity pump range has a performance range between 800 ml/min at 200 RPM and 1L/min at 240 RPM

Features of the new medium capacity pump includes the following:

• 8mm bore tubing in Santoprene or Silicone (Viton available upon special request) to suit a range of different chemicals
• 230V AC or 24V DC Motor
• Anodised aluminium  motor and gearbox
• Optional stainless steel mounting plate
• 8mm polypropylene inlet and outlet spigots
• Stainless spinner assembly with PVC rollers
• CE compliant

Contact sales@ambic.co.uk for further details